Do you have two buttons on top of your toilet, but don’t know why or what they are for? If so, you’re not alone! Many toilets have a flush button option with two buttons: one marked ‘full’ and the other marked ‘half.’
In this blog post on how to flush toilet with two buttons on top, we’ll explain exactly how to use each of these buttons – depending on the amount of water needed in order to effectively flush the toilet – and offer a few tips for troubleshooting any issues you may encounter along the way.
Whether your toilet has recently been installed or it’s been there for years without being used properly, keep reading to find out more about flushing with two buttons on top!
What is the Use of Two Buttons on Top of the Flush
The two buttons on top of the toilet flush are used to control the amount of water that is released into the bowl. The ‘full’ button will release a full tank of water while the ‘half’ button releases half of it. This allows users to conserve water by choosing how much they need for different types of waste, such as solid or liquid.
For instance, if you are only flushing liquid waste, the ‘half’ button can be used to save water. Similarly, if you need a more powerful flush for solid waste, the ‘full’ button can be selected.
11 Step-by-step Guides on How to Flush Toilet With Two Buttons on Top:
Step 1: Locate the Two Buttons
First, you will need to locate the two buttons on top of your toilet flush. In most cases, these two buttons are labeled ‘full’ and ‘half’, however, they may also be labeled differently. It is important to identify which button corresponds with what amount of water before you begin.
But if you are not sure, refer to the instruction manual that came with the toilet. This will help you identify the proper buttons. Although, most of the time, it is not necessary.
Step 2: Determine What Type of Waste You Are Flushing
Once you have located the two buttons, determine what type of waste you will be flushing. If it is liquid waste, then you should select the ‘half’ button for a more efficient flush. For solid waste, choose the ‘full’ button to ensure that your toilet is effectively flushed. If you are unsure, it is best to err on the side of caution and go with the ‘full’ button.
It is better to use a little more water than not enough. This will help prevent clogs and other plumbing problems. If you are using a toilet brush, the ‘full’ button should always be selected.
Step 3: Push Down On The Desired Button
Once you have decided which button to use for your flush, push down on the desired button firmly until you hear or feel a click. This indicates that the water has been released into the bowl. It is important to note that some toilets may require a longer push down on the button in order for it to work properly.
But if you find that your toilet still doesn’t flush, it may be due to a faulty flushing mechanism. That is why it is important to check the instructions that came with your toilet or call a plumber if need be.
Step 4: Wait for the Flush to Complete
Wait a few moments for the flush to complete and all of the waste to be removed from the toilet. If you are using the ‘half’ button, it may take a little longer for the flush to complete. But if you have chosen the ‘full’ button, it should be done much more quickly.
Once the flush is complete, you can check to make sure that all of the waste has been removed and that the bowl is clear. Remember to flush the toilet again if necessary. It is always better to err on the side of caution and use a little extra water.
Step 5: Check For Clogs or Leaks
Once the flush is complete, check for any clogs in the drain pipes or leaks from around your toilet’s tank. If you find any issues with either of these items, contact a plumber immediately to prevent further damage.
It is also important to check for any water around the base of your toilet as this can be a sign that a seal or gasket has failed. If this is the case, call a plumber as soon as possible. Otherwise, the problem may worsen over time and cause extensive damage.
Step 6: Push Down On The Button Again
After checking for any potential issues, push down the button again in order to shut off the water flow. This will help conserve water and ensure that no leaks occur from within your toilet. But if you notice any water still leaking from around the tank or bowl, contact a plumber as soon as possible.
On the other hand, if you are satisfied with the flush and do not notice any leaks, your job is done! This will help ensure that your toilet will continue to function properly.
Step 7: Repeat The Process When Necessary
Repeat the process of flushing your toilet with two buttons on top whenever it is necessary. Allow a few moments for the flush to complete before checking for any clogs or leaks. If you find any, contact a plumber immediately to prevent further damage.
If everything looks good, push down on the button again to shut off the water flow and you are done! But, each time you flush the toilet, be sure to check for any water around the base of your toilet as this can be a sign that a seal or gasket has failed.
Step 8: Clean Up Any Spills or Overflows
If you find that you have caused any spills or overflows during the flush, clean them up immediately to avoid any further damage from occurring. It is important to take the necessary steps in order to keep your toilet clean and prevent any bacteria or mold from growing inside.
It is also recommended that you wipe down the outside of your toilet with a disinfectant to help keep it germ-free. This will help ensure that your toilet is safe for everyone to use.
Step 9: Check For Exposed Wires and Pipes
After cleaning up any messes, check for any exposed wires or pipes around your toilet in order to ensure that they are properly secured and functioning correctly. It is important to take the necessary steps in order to keep your toilet safe and free from any potential danger.
This will help ensure that your toilet is safe and functioning correctly. It is also important to check for any signs of water damage or corrosion around your toilet as this can be a sign that there is a leak somewhere in the system.
Step 10: Test The Flush Again If Necessary
Once all of these steps have been completed, test the flush again to make sure that it is working properly. If you find that the flush is not working correctly or that water is still leaking from around the tank, contact a plumber immediately. This will help ensure that your toilet continues to function properly and safely.
But if everything looks good, you can rest assured knowing that your toilet is working just as it should. It is important to take the necessary steps in order to keep your toilet safe and well-maintained.
Step 11: Enjoy Your Toilet With Two Buttons On Top
Finally, enjoy your toilet with two buttons on top of the flush! This feature allows you to conserve water and save money by choosing how much water you need for different types of waste. Followed correctly, this process should make flushing your toilet with two buttons on top a breeze.
Always be sure to check for any clogs, leaks or water damage around your toilet before and after using the flush. This will help ensure that your toilet remains in good condition for years to come.
With this handy guide on how to flush toilet with two buttons on top, flushing your toilet has never been easier! Whether it’s a newly installed unit or an old one that you just hadn’t figured out yet, simply follow the above steps and make sure your toilet is running as efficiently as possible. Now go ahead and enjoy your perfectly flushed toilet!
Frequently Asked Questions
Q: How Often Should I Flush My Toilet With Two Buttons on Top?
A: It is recommended that you flush your toilet at least once a day or more, depending on the amount of waste being flushed. The two buttons on top of the toilet can be used to conserve water and save money by choosing how much you need for different types of waste.
Q: Is It Possible To Damage My Toilet By Pushing Down On Both Buttons At The Same Time?
A: No, it is not possible to damage your toilet by pushing down both buttons at the same time. However, it will result in an inefficient flush as both buttons will release a full tank of water into the bowl. Therefore, it is important to only use one button at a time as needed.
Q: How Do I Troubleshoot Any Issues With My Two Button Flush System?
A: If you are having any issues with your two-button flush system, it is best to contact a plumber for troubleshooting and repair. They will be able to assess the issue and determine the best course of action in order to resolve it.
Q: Are There Any Other Tips For Ensuring My Toilet Is Working Efficiently?
A: Yes, there are a few other tips for ensuring your toilet is working efficiently. Make sure to clean your bowl and tank regularly, as this will help prevent any blockages or clogs from occurring. Additionally, check for any exposed wires or pipes around your toilet in order to ensure that they are properly secured and functioning correctly.
Conclusion
With these steps on how to flush toilet with two buttons on top, you should be able to confidently flush a toilet with two buttons on top. Remember to discourage excess toilet paper use and always take caution when working with plumbing systems. As a helpful tip, if you ever come across an unfamiliar toilet or plumbing system, don’t be afraid to call a professional.
Despite the minor difficulties it can cause, having a dual-flush system installed in your home is an economical and ecological investment that provides additional peace of mind for the safety of your home and the environment.
It’s worth investing time in educating yourself about the various types of systems available today so that you’re prepared for any situation. Head out now and get all the knowledge needed to master flushing a toilet with two buttons on top!
