Are you looking to upgrade your bathroom? A bath fitter tub brings a modern touch and gives it an edge. These high-tech, efficient baths can enhance the look of your washroom and increase its practical usability. Not only do they require less maintenance than traditional baths, but they are easier to install as well.
Whether you’re looking to upgrade your bathroom or help someone else with the installation, here are a few steps to help install a bath fitter tub. Just remember to always read the manufacturer’s instructions before beginning any installation.
In this post, we’ll cover all the steps necessary for how to install a bath fitter tub so that you can get started giving your bathroom an incredible makeover!
What Will You Need?
Before installing your bath fitter tub, ensure you have all the necessary tools and materials to complete the job. Here’s what you’ll need:
- Tub
- Installation kit (included with purchase)
- Level
- Tape measure
- Screwdriver/drill & bits
- Adjustable wrench
Once you have all the tools and supplies, it’s time to start!
10 Easy Steps on How to Install a Bath Fitter Tub
Step 1: Preparing the Bathroom
Before installing your bath fitter tub, make sure that there is enough space for it in the bathroom. Measure the size of the area where you will place the tub, and use a level to ensure that it’s even on both sides. If the area is uneven, use mortar or shims to level it out.
Step 2: Installing the Subframe
The next step is to install the subframe to support your bath fitter tub. Using a drill or screwdriver, this frame should be screwed securely into the floor joists. Make sure that you use screws of an appropriate size and at least two screws per floor joist.
Step 3: Installing the Jet Pipes
Now that you have installed the subframe, it’s time to install the jet pipes. These will provide warmth and relaxation for those using the bath fitter tub. Use an adjustable wrench to secure the pipes in place.
Step 4: Setting Up the Tub
Once your pipes are in place, it’s time to set up the tub. Place the bath fitter tub on the subframe and use bolts or screws of an appropriate size to secure it in place. Remember to use a level to ensure the tub is even.
Step 5: Sealing the Tub
Now that the tub is installed seal it properly so no water will get out. For this, you will need a sealant of an appropriate type. Read the manufacturer’s instructions for the right sealant to use. Use a brush or roller to apply the sealant and ensure the edges are properly sealed.
Step 6: Installing the Faucet
The next step is to install the faucet for the bath fitter tub. This will ensure you have a steady supply of hot and cold water for your bath. Make sure to read all the manufacturer’s instructions before beginning this step. Otherwise, it could lead to a lot of problems later on.
Step 7: Installing the Drain
Next, you need to install the drain so that used water can be drained away easily and quickly. Again, make sure to follow the instructions provided by the manufacturer for this step. Another important point to remember is to use the plumber’s tape on the drain threads for a watertight seal.
Step 8: Installing the Showerhead
Once you have everything else in place, it’s time to install the showerhead. This will provide a steady stream of water when using your bath fitter tub. You may need a drill or screwdriver to secure it in place.
Step 9: Connecting the Pipes
Now that all the components are in place, you need to connect them together. This includes connecting the water supply pipes and jet pipes for your tub using an adjustable wrench. Ensure all connections are tight and secure before turning on the water system.
Step 10: Testing the Tub
The final step is to test your tub. Make sure that all components are working properly and that there are no leaks. If everything is in order, enjoy a warm relaxing soak in your new bath fitter tub! Remember to follow all the manufacturer’s instructions for maintenance and use.
With these steps, you should now understand how to install a bath fitter tub so that you can get started on giving your bathroom a modern makeover. For more tips and tricks on how to upgrade your home, be sure to check out our other blog posts. Happy renovating!
5 Additional Tips and Tricks
- Make sure that the bathroom is properly ventilated before beginning the installation. Open a window or use an exhaust fan to ensure proper airflow.
- Double check measurements and make sure you have all necessary tools and materials on hand before starting your project.
- Read through all instructions carefully and understand each step before beginning so you can work through the installation process efficiently and on time.
- Wear protective gear, such as gloves and safety glasses, to prevent cuts or scrapes during installation.
- If you have any questions or concerns throughout the installation process, contact a professional for help. Doing so will ensure the bath fitter tub is installed correctly and to the highest safety standards.
Take your time with the installation and double-check that everything is secure and correctly installed before using the bath fitter tub. Doing so will help ensure a long life for your newly installed bath fixture!
5 Things You Should Avoid
- Do not use a power drill or other tools when installing the Bath Fitter tub.
- Avoid using hammers, screwdrivers, chisels, and other hard objects that can cause damage to the tub or its components.
- Never attempt to adjust or modify the plumbing lines yourself – always have a certified plumber do this for you.
- Refrain from skimming on the necessary materials like caulk or sealant, as this could lead to water leakage down the line.
- Never leave any tools, screws, nails, or other objects inside the tub when you finish your installation. Doing so could cause injury if someone came into contact with them after using the tub.
Avoiding these common mistakes will help ensure your bath fitter tub is safely and properly installed. With a few simple steps, you can have a beautiful, functional tub for years!
How Does Bath Fitting Work?
Bath fitting is installing a bathtub or shower enclosure in your home. This includes measuring, cutting, and fitting materials such as tile, fiberglass, or acrylic to the existing walls and floors. Professional bath fitters will use special tools and techniques to ensure that all pieces fit perfectly together for a seamless finish.
The installation process typically starts with a professional coming to your home and taking precise measurements of the existing walls and floors. This is followed by cutting, fitting, and securing the materials in place. Depending on the type of material you choose, bath fitters may also need additional work, such as sealing or waterproofing the area before installation can begin.
Once all pieces are in place, professionals will make sure that everything is level and secure. Finally, they will fill in any grout lines and ensure all seams are sealed with a waterproof sealant.
By taking the time to install your bath fitter tub properly, you can enjoy many years of relaxing baths and showers at home! Taking these extra steps will ensure your bathroom has a beautiful finish and is completely safe for you to use. With the help of a professional bath fitting service, you can enjoy all the benefits of having a new tub or shower enclosure in your home.
Is Bath Fitter Better Than Tile?
Bath fitter is a popular bathroom option due to its durability and ease of installation. This type of material is made from acrylic or fiberglass, which are extremely durable and waterproof. Bath fitters can be quickly installed in various styles, colors, and textures.
Tile is another great option for bathroom walls and floors, and it is popular for its classic look. Tiles come in various colors, styles, and sizes to fit any design scheme. They are also extremely durable, easy to clean, and can last for years if installed correctly. However, tile takes much longer to install than bath fitters due to the intricate process.
Ultimately, which option you choose depends on your needs and preferences. If you’re looking for a quick and easy installation with an updated look, then bath fitters may be the way to go. On the other hand, if you want a classic and timeless feel in your bathroom, tile is the perfect choice. Whichever option you choose, you can rest assured that your bathroom will be beautiful and functional for years to come.
Conclusion
How to install a bath fitter tub can be a great way to improve the look and feel of your bathroom. With a few simple tools, some patience, and following the tips discussed in this blog post, you should be able to install your new bath fitter tub with minimal effort successfully.
Hopefully, this blog post has given you the information and knowledge needed to decide how to install your new bath fitter tub best. Remember, if you ever have any questions or concerns while working on the installation project, it is always best to contact a professional who can help guide you in the right direction based on their expertise and experience with these types of projects.
Thank you for reading this blog post – we hope it helps!
