Are you tired of having to awkwardly maneuver around your bathtub crank in order to take a bath? Then it’s time for you to learn how to make your own custom-made bathtub crank!
By making your own crank, not only can you customize it exactly the way you want it, but you will also be able to save money and easily access your sink or tub without having to wrestle with an uncomfortable lever. Here is everything that you need to know about how to make bathtub crank!
Bathtub crackers are handy contraptions that allow you to easily move your tub around for easy access and storage. Having a well-made, rugged bathtub cranker makes maneuvering your bathtubs even easier.
Here, we’ll be walking you through the process of creating your own bathtub cranker. From constructing it with basic materials found in most hardware stores’ inventory to lubricating and tightening its moving pieces – all the way through checking it out once assembly is completed – we’ve got everything you need to get started on making your own reliable moving device!
Why May You Want to Make Bathtub Crank?
1. Easier Way to Open and Close the Bathtub Drain
One of the main reasons to make a bathtub crank is because it is a much easier way to open and close the bathtub drain. Instead of having to manually unscrew or screw in the plug, you can just use the crank handle to do this. This makes the task of draining your tub much quicker and easier, especially if you have limited mobility or strength.
2. Create an Aesthetically Pleasing Look
Another reason why you may want to make a bathtub crank is that it allows you to create an aesthetically pleasing look in your bathroom. Many people like the industrial, rustic look that the cranks give off in comparison to a standard drain plug. You can find cranks in a variety of styles to match your bathroom design.
3. Avoid Replacing a Damaged Plug
Making a crank for your bathtub can also help you avoid the need to replace a damaged plug. If your drain plug has worn out over time, it may no longer function correctly and may require replacement. By creating a crank, you can avoid having to replace the plug, thereby saving yourself time and money.
How to Make Bathtub Crank in 6 Easy Steps
Now that we’ve discussed why you may want to make a bathtub crank, let’s take a look at how it is done.
Step 1: Gather All The Tools
The very first step is to gather all the necessary tools and materials that you will need for this project. This includes a drill, drill bits, wood screws, and a crank handle.
Step 2: Measure And Mark The Cutout
Once you have your tools ready, measure and mark the cutout in the bathtub wall. Make sure that it is centered so that when the crank is installed, it will be balanced. Also, you have to make sure that the cutout is large enough for the crank handle to fit through.
Step 3: Cut Out The Hole
Now is the time to start cutting out the hole. Use a drill bit and make sure that you are drilling away from yourself so that you don’t accidentally injure yourself. When done, clean up any remaining dust in the area.
Step 4: Install The Crank Handle
Now you have to install the crank handle. Make sure that it is secured tightly with wood screws and then attach it to the bathtub wall.
Step 5: Attach The Crank Arm
Next, attach the crank arm to the crank handle and make sure that it is secured firmly in place before proceeding to step 6. Also you have to make sure that the arm is aligned properly otherwise it won’t turn correctly.
Step 6: Test Your Creation
Finally, you have to test your creation and make sure that it works properly. Rotate the crank handle several times to ensure that everything is in working order. If everything looks good, then you’re all set!
Some Extra Tips to Make Bathtub Crank
1. Do Not Over-Tighten the Screws
When installing the crank, make sure that you do not over-tighten the screws as doing so can cause damage to the integrity of the bathtub. This will also make sure that the crank is not too difficult to turn.
2. Use a Hacksaw for Cutting Through Materials
If you need to cut through materials, such as wood or metal, it is best to use a hacksaw rather than power tools. This will help reduce the risk of damaging the materials and ensure that the bathtub crank is securely fastened.
3. Wear Protective Gear
When working with power tools or when cutting through materials, it is important to always wear protective gear such as gloves, goggles, and a face mask to protect yourself from flying debris.
4. Clean the Tub After Installing the Crank
Once you have successfully installed the bathtub crank, it is important to clean the tub thoroughly to make sure there are no metal shavings or other debris left behind that could cause damage. Also, make sure to test the crank after installation to ensure it is functioning properly.
5. Seek Professional Assistance
If you are having difficulty with your bathtub crank installation or are unsure of how to proceed, it is important to seek professional assistance from a qualified plumber or handyman. They can provide helpful advice and guidance on how to successfully install your bathroom crank.
Frequently Asked Questions
What Precautions Should I Take Before Making a Bathtub Crank?
It is important to take safety precautions when making any type of tool. Be sure to wear safety goggles and gloves, work with tools in an area free from distractions, and disconnect the power source before beginning your project. Additionally, check all parts that you will be using for any damage or wear before getting started.
What Tools Will I Need to Make a Bathtub Crank?
For this project, you will need a drill, metal file, pliers, a hack saw, and an adjustable wrench. You may also need additional tools depending on the type of crank you are making. Also, make sure to use the right drill bit for your materials.
What is the Process for Making a Bathtub Crank?
The process for making a bathtub crank will vary depending on the type of crank you are making and the material it is made from. Generally, the process involves drilling holes in the material, cutting out the appropriate pieces, filing down any rough edges, and assembling the crank components. Once the crank is assembled, it should be tested before being installed in the bathtub.
How Can I Make Sure My Bathtub Crank is Secure?
Once your bathtub crank is constructed and installed, you will want to make sure that it is secure. This can be done by using strong adhesives and screws to secure the crank in place. Additionally, it is important to periodically check for any signs of wear or damage as well as re-tighten any bolts or screws that may have come loose over time.
What Are Some Common Issues With Bathtub Cranks?
Common issues with bathtub cranks include insufficient tightening of nuts and bolts, incorrect installation, damaged or worn parts, and improper fitment. It is important to make sure all components are securely fastened and that appropriate measurements have been taken in order to ensure a secure fitment.
Additionally, any parts that appear worn or damaged should be replaced before installing the crank.
What Are Some Tips for Installing a Bathtub Crank?
When installing a bathtub crank, be sure to take your time and double-check all measurements before drilling any holes. Make sure that all components are securely fastened. Additionally, use strong adhesives and screws as needed in order to ensure security. Finally, test the crank several times before using it to make sure that everything is functioning properly.
Conclusion
Well, there you have it – the definitive guide to making bathtub cranks. From choosing the correct materials and tools to execute precise measurements and cabinetry, crafting a bathtub crank from scratch is an intricate process that requires patience and skill.
With the tips on how to make bathtub crank outlined above, however, you can create a beautiful addition to your bathroom that will last for many years to come.
Take your time gathering all of the necessary supplies before beginning this project; not only will you save yourself time and hassle during the construction process itself, but you may even find ways to cut down on costs when shopping around for material prices.
Most importantly, don’t forget to enjoy the fruits of your labor! You’ve just crafted something that few people ever truly get the chance do with their own two hands – congratulations!